Teardown of the Asus ROG Phone 6 shows all the cooling optimizations

The Asus ROG Phone 6 has RGB lighting for the ROG logo on the back

Asus introduced the ROG Phone 6 and also 6 Pro the other day. The primary distinctions in between them are that the Pro has 18GB of RAM (the vanilla peaks at 16GB) and also comes set up with 512GB storage space, plus there is an additional 2 OLED display screen on the back. The vanilla phone just has actually an RGB brightened logo design on the back.

That display screen is the primary step in the teardown video clip by WekiHome. A bow wire powers the logo design lights, an additional link the NFC coil. It just obtains even more fascinating from there.

The Asus ROG Phone 6 has RGB illumination for the ROG logo design on the back

The ROG Phone 6 has actually been made as a pc gaming phone from scratch. The 6,000 mAh battery is divided right into 2 different cells, which enables the Snapdragon 8+ Gen 1 based motherboard to port in between them.

The motherboard is in the middle, so that it can be cooled optimally by the AeroActive Cooler 6 add-on
The motherboard remains in the center, to ensure that it can be cooled down efficiently by the AeroActive Cooler 6 add-on

This places it in the optimum placement to be cooled down by the AeroActive Cooler 6, which truly aids to maintain the chipset going for full throttle in X Mode. Have a look at our testimonial for information on the thermals and also the air conditioning efficiency of the AeroActive add-on.

The teardown begins following 4 mins right into the video clip. Prior to that are some standards and also a demonstration of the Cooler 6 and also the Kunai 3 Gamepad.


Please enter your comment!
Please enter your name here